Posted on Tuesday, April 14, 2020 • Category:
FM Transmitters
This is 1 Watt FM amplifier with a good design that can be used to amplify RF signal of low power FM Transmitters in the 88 – 108 MHz band. It is very sensitive if you use good RF power amplifier transistors, trimmers and coils. It has a power amplification factor of 9 to 12 dB (9 to 15 times). At an input power of 0.1W the output will be 1W. You must choose T1 depending on applied voltage. If you have a 12V power supply then use transistors like: 2N4427, KT920A, KT934A, KT904, BLX65, 2SC1970, BLY87. At 18 to 24V power supply you must use transistors like: 2N3866, 2N3553, KT922A, BLY91, BLX92A. You may use 2N2219 at 12V but you will get maximum output power of 0.4W.
15W Transmitter Power Amplifier 88-108MHz
2-5 Km Long Range FM Transmitter
2SC9018 FM Transmitter
Broadcasting FM Transmitter
iPod FM Transmitter
Long Range FM Transmitter
300m FM Transmitter
PLL FM Transmitter using LMX1601, ATtiny2313 AT90S2313
30 Watt Linear FM Amp with BLY89
SAA1057 PLL Synthesized FM Transmitter Circuit-Zone.com © 2007-2024. All Rights Reserved.