Posted on Friday, April 11, 2008 • Category: Amplifiers
GainClones have VERY few components and this one is based on the National Semiconductor LM3875 IC. The PCBs and components are very simple and quick to make, only took about 20 mins to assemble both amps and rectifier board. DC offset was about 80mV on one channel and about 40mV on the other. I used the optional Ci capacitor in the national datasheet for the IC which reduced it to between 0-4mV: This is the capacitor I chose, its an Elna Starget (expensive). The case was MUCH more time consuming and difficult to make though. I bought all the aluminum from a scrap metal yard including the heatsink. I got my aluminum panels cut at a sheet metal shop as I cant make straight cuts with a hack saw.
Circuit-Zone.com © 2017. All Rights Reserved.