Circuit-Zone.com - Premium Quality Electronic Kits, DIY Electronics, LC Meter Kit, 60MHz Counter Kit, XR2206 Function Generator Kit, Transmitter Kits, Volt Ampere Meter, RF Remote Control, Electronic Components, BA1404, BH1415, BH1417, TDA7000, 38KHz Crystal, 7.6MHz Crystal, KV1310 BB105 BB109 Varicap Diodes, Stereo FM Transmitters, Stereo Encoder, Ferrite Beads, Variable Coils

This tiny RF Transmitter module is great for building your own wireless remote control or wireless link. Remote control that allows to control different devices can be easily implemented with wide range of encoder/decoder chips (such as HOLTEK HT12E + HT12D or MC145026 + MC145027 available in our store) or PIC / AVR microcontrollers. RF Module can also be used for sending data at up to 9.6KB/s.

Specifications

TTL Compatible Input

Voltage Supply: 3 - 12V

Power Consumption: 5 - 45mA

Quiescent Current: 20uA

Max Transfer Rate: 9.6KB/s

Operating Frequency: 433MHz

Transmitting Range: 1000m

Dimensions: 19mm x 19mm x 8mm

4-Channel 433MHz Wireless RF Remote Control (Transmitter + Receiver)

4 Channel RF Remote Transmitter and Receiver allows to remotely control four appliances. RF Remote Control provides 4 momentary outputs that can be wired to relays and control home appliances, lights, motors, light dimmers, robotic devices, RC cars, computer, etc. RF transmitter provides up to 150m range. Selection of custom address codes allows to operate more than one remote control system in the same area or to control one receiver with multiple transmitters. If required momentary outputs can be converted to toggle with low cost digital 4013 IC. 12V (27A) alkaline battery is included.

Specifications

4 Momentary Outputs

150m Transmission Range

Rock-solid oscillator provides reliable operation

Valid transmission LED status through VT connection

High noise immunity

Standard header connection (breadboard compatible)

Selection of custom address codes allows to operate more than one unit in the same area or controlling the same receiver with multiple remotes

RF Transmitter Specifications

Voltage Supply: 12V (Included 27A Alkaline Battery)

Transmission Frequency: 433MHz

Transmission Range: 150m

Dimensions: 62 mm x 38 mm x 14 mm

RF Receiver Specifications

Voltage Supply: 5V

Transmission Frequency: 433MHz

Output Mode: Momentary

Power Consumption: 5 mA

Receiving Sensitivity: -101 dbm

Output PINs: GND, 5V, D0, D1, D2, D3, VT (Status LED)

Dimensions: 41 mm x 22 mm x 6 mm

433MHz RF Receiver Module

This tiny RF Receiver module is great for building your own wireless remote control or wireless link. Remote control that allows to control different devices can be easily implemented with wide range of encoder/decoder chips (such as HOLTEK HT12E + HT12D or MC145026 + MC145027 available in our store) or PIC / AVR microcontrollers. RF Module can also be used for sending data at up to 4.8KB/s.

Specifications

TTL Compatible Output

Voltage Supply: 5V

Power Consumption: 5mA

Receiving Sensitivity: -103 dB

Max Transfer Rate: 4.8KB/s

Operating Frequency: 433MHz

Dimensions: 30mm x 14mm x 7mm

nRF24L01 2.4GHz Wireless Transceiver with Antenna

nRF2401A 2.4GHz transceiver modules with built-in antenna. Designed around nRF2401A chip with improved sensitivity and range. Two units are required for a complete link.

Frequency: 2.4GHz

Built-in 2.4Ghz antenna

Data Rate: up to 2Mbps

Standard 0.1' 2x 4 PIN header (breadboard compatible)

Voltage: 1.9 ~ 3.6V

Dimensions: 17 x 34 x 1 mm